Description
Marine Mini Carbon Monoxide Alarm with Trim Ring
Individual Size
- Length: 10 (Inch)
- Width: 8 (Inch)
- Height: 2 (Inch)
- Weight: 0.5 (Pound)
Additional Information
- This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
- NMMA Listed Component.
- Works in harsh marine environments and extreme temperatures. This is the only marine CO alarm listed to operational temperatures of -40°F to 158°F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.
- No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut off alarms available.
- Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO.
- End of Life Signal alerts boater to replace the alarm after 5 years of service.
- Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
- Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.
- Operating Specifications: Conforms To ANSI / UL STD 2034, Testing Laboratory: ETL/Intertek, Alarm Point: 400 PPM 4-15 Minutes, Low voltage power warning at 7 Volts, Power Supply and Current Draw: 37 mA at 13.8 VDC, Operational Range: 13.8 Volts +/-15%, Low voltage power warning at 7 Volts